To start a great experience with Norton, you have to purchase a legitimate subscription to it. This subscription can be bought from the official site of Norton. Not only this, but the process of norton.com/setup is also very simple. Read the process given below carefully.
What's Norton Ghost Error 10030?
While Norton Antivirus is widely considered among the greatest anti-virus programs on the current market, you could periodically encounter errors throughout its functioning like the Norton.com/setup ghost malfunction 10030. This mistake typically appears when there is an issue from the communication involving your Phantom console and your client computer.
How Can You Detect a Mistake 10030?
In case your Ghost system is experiencing the malfunction 10030 on Norton.com/setup, you are going to get the error once you attempt to manually connect the Ghost machine session having a bootable CD.
The best way to Solve Norton Ghost Masks 10030?
The following are a few of the strategies you can use to eliminate the ghosting error 10030 using Norton.com/setup. In case the primary method can not work to resolve the problem, try the next one, etc until you no longer encounter the ghosting error.
Method Inch
First, make sure your firewall isn't causing the problem by opening up the UDP ports 6666 and also 7777 when demanded by the GhostCast server.
- Open the command prompt.
- Run the command 'netstat'. This can help one locate open ports.
- It is also possible to use the command telnet' to obtain a specific open interface.
- Method Two
- Ensure that your router is not blocking the multicast traffic.
Check if you're receiving the Norton.com/setup error message when supplying the internet protocol address to the Ghost client using the command Jaddr = ipaddressofconsole.
If you are, choose Unicast instead of Multicast in the IGMP preferences of your router.
Third party software and applications may be blocking the communication.
In the event the app has blocked Ghostsrv.exe, then you may include it by hand into the machine.
Alter the existing individual or insert a new rule allowing communicating via Ghost.
Method 4
Update your machine drivers. Make certain that you check your system adapter is accurate and updated to the latest version.
Method 5
Insert the Ghost console and client to the workgroup after removing it from the domain.
Method 6
This Norton.com/setup mistake 10053 also can arise because of issues in the switch along with the router between the machine and the PC.
Work with a similar PC While the Ghost console to place a picture on.
Modify the repository controllers.
Change the control of the Image Repository to'everyone'.
Once the error goes away, change the controller from'everyone' back to the particular Ghost client.
5574