Every vaper has ever run into problems with their electronic cigarette, in most cases, these little problems have an easy solution. We are going to tell you in this article some solutions to the most frequent problems that usually occur with vapers. Sometimes when we go to vape we realize that it loses liquid, either through the mouthpiece or through any of the cracks in our cigar.
Every vaper has ever run into problems with their electronic cigarette, in most cases, these little problems have an easy solution. We are going to tell you in this article some solutions to the most frequent problems that usually occur with vapers. Sometimes when we go to vape we realize that it loses liquid, either through the mouthpiece or through any of the cracks in our cigar. This can be due to multiple reasons that can be easily avoided in the vast majority of cases. Here are some of the most common causes why our electronic cigarette loses liquid and tips to solve it;
Incorrectly filling The Electronic Cigarette With Vaper Liquid
One of the most common causes of the liquid coming out of the electronic cigarette is that the vaping user pours the liquid directly through the hole in the mouthpiece, instead of unscrewing it and doing it through the hole it has for it. In this way, the liquid usually escapes through the lower part of the tank, or through the air regulation slot. Always unscrew the nozzle and pour the liquid through the hole that is free. If in doubt, follow the instructions that should accompany your electronic cigarette.
Another common reason why liquid leaks out of the tank are that the vaping user fills the tank with too much liquid, above the fill indicator mark. If it is overfilled, when the resistance is inserted, the liquid overflows or floods the suction tube, leaving it from the bottom. That is why it is always important to fill in as far as the mark indicates and never exceed it. Another reason may also be that the resistance is not correctly tightened or the tank is not properly closed.
Wear On Rubber Gaskets
Something that happens less often, but is also possible, is that the rubber gaskets on the tank are worn. This can happen after more than 6 months of use, it is not frequent, but it can happen. Many models include extra rubber gaskets for changing. In case the fluid leak is not due to any of the other causes described in this article, you can try changing the rubber seals and see if this fixes the problem.
Overheating
It is already written on the CBD E-Liquid Boxes that you should avoid overheating. It is also possible that the liquid starts to leak out if the e-cigarette gets too hot, the liquid becomes very porous, or less dense, and can leak from the resistance to the air outlet. The user is advised to wait a bit for it to cool down before continuing to vape.
Other Reasons
Sometimes small drops also come out of the nozzle, this is due to condensation and is normal in most models. To solve this you can turn your electronic cigarette upside down and press the power button for a few seconds, to extract the condensed liquid. You can wipe the liquid residue on the nozzle with a napkin and it is ready to use again. If you still cannot stop the liquid coming out, it is recommended to open the tank of the clearomizer or atomizer, unscrew everything, including the resistance, and clean everything very well before reassembling. Sometimes replacing the resistor also fixes this type of problem.
It should also be borne in mind that the fact that a little liquid comes out of the nozzle is normal in many models, it would only be guaranteed if the liquid leakage is abundant and as long as it is not due for one of the reasons mentioned above.
9671