EOT cranes make your industrial material handling process effortless. It is one of the best investments a factory could make because it will increase productivity and make the manufacturing process seamless. However, it is important that you should have stringent usage protocols as soon as you install your EOT cranes.
EOT cranes make your industrial material handling process effortless. It is one of the best investments a factory could make because it will increase productivity and make the manufacturing process seamless. However, it is important that you should have stringent usage protocols as soon as you install your EOT cranes.
You should identify trained and qualified operators to run your Goliath cranes in Aurangabad. As a part of your protocol, the skill level of the operator needs to be verified before allowing the operator to use the crane. Even in dire situations semi-skilled or unskilled operators should never be allowed to run the equipment. This is not something you would want to take chances with because you would put people under serious risk and invite unnecessary, fatal accidents in your factory.
Regular maintenance and upkeep of the crane should be scheduled and whether these maintenance tasks are handled as per the schedule should be verified. There is no use having a schedule in place when you do not intend to follow it.
Every time before the crane is switched on, all the pre-checks should be performed. Without running the pre-checks the cranes should not be operated. Your operator should be trained by the manufacturer to run the required pre-checks. If any issues are noticed during the pre-checks, they should be notified to the designated authorities and such reporting should be recorded and kept track. Depending on the graveness of the issue, the servicing team from the manufacturer should be summoned to address the problem.
The operator should use all the required safety gears when operating the crane. The operator should not be forced to operate the equipment without rest and beyond his working hours. If continued operation is necessary, adequate number of operators should be employed so that no single operator is over taxed. This is one of the most important safety measures to be followed without fail. A tired operator is often the major cause of accidents in the factories.
The cranes should never be operated beyond the maximum allowed capacity. Severe sanctions should be issued when this condition is not met. The entire girder area where the crane is operated should be kept clear at all times. As a part of the pre-checks process, area clearance should be performed.
Your manufacturer of single girder overhead crane in Aurangabad should inspect the cranes periodically. This has to go as per pre-scheduled calendar. If there are any issues with the crane, it has to be addressed immediately without fail.
In case of breakdown or issues who should be notified should be decided in advance so that there are not delays in finding out at the time of issue who needs to be notified. By following all these protocols, you are creating an optimal environment for the use of your cranes. This will minimize the downtime and increase the productivity level. You will also be able to extend the life of the crane to a considerable level.
1177862