If your printer is Ethernet ready and you have a network consisting of at least a router with one available port. This is a good option especially if you want to use it with more than one computer. How to connect brother printer to mac plug a Cat 5 or greater cord in the printer and router ports. You would need to supply model numbers for detailed instructions. But, in many cases modern printers will self-activate once the connection is made.
If your printer is Ethernet ready and you have a network consisting of at least a router with one available port. This is a good option especially if you want to use it with more than one computer. How to add brother printer to mac plug a Cat 5 or greater cord in the printer and router ports. You would need to supply model numbers for detailed instructions. But, in many cases modern printers will self-activate once the connection is made.
If your printer is Ethernet ready and you have a network consisting of at least a router with one available port. This is a good option especially if you want to use it with more than one computer. To connect you plug a Cat 5 or greater cord in the printer and router ports. You would need to supply model numbers for detailed instructions. But, in many cases modern printers will self activate once the connection is made.
I see that Clint gave a good answer. Although, I do wish to correct a couple points.
You didn’t specify the model of your printer, so any information given will be general and can apply to any make or model of printer.
Depending on the model of your printer, you can connect to any computer, via Ethernet, USB, FireWire, WiFi, Bluetooth, or if it is very old Serial or Parallel. These last two usually need special adapters and applications to set them up, so I will skip them.
If your printer is Ethernet ready and you have a network consisting of at least a router with one available port. This is a good option especially if you want to use it with more than one computer. To connect you plug a Cat 5 or greater cord in the printer and router ports. You would need to supply model numbers for detailed instructions. But, in many cases modern printers will self activate once the connection is made.
As Clint said you can connect via USB. This is usually only good for one computer to one printer. You can share the printer over the internet or many routers have USB ports for this purpose.
If your printer only has FireWire or IEEE1344 or a couple other names, it connects similar to USB
The final two options are both wirelessly. Very few printers are Bluetooth, but it would connect like any other Bluetooth device.
I can’t give detailed instructions for WiFi since you didn’t supply model numbers. But, on most models you will find WiFi setup on the settings screen or a special button. Look for the WiFi logo.
It is critical to note down the SSIS and system key before associating with a Brother printer. We will enable you to take care of the issues of investigating. So here's a simple method to interface to connect Brother printer to mac.
Above all else, evacuate the intensity of your Brother printer from the electrical plug. Unplug the link of the interface, as well.
Switch the printer on and plug in the electrical plug now. Addition the CD into your printer's CD ROM drive.
Pursue the on-screen bearings to download the driver.
Reboot your printer so the recently introduced driver is perceived.
Only two ways: Ethernet or USB. I personally put printers on Ethernet, but I just gave an extra laser with a USB cable to someone.
If you have two Macs on Ethernet, and the printer only has USB, you can connect the printer to one of them, then “share” the printer so that both can use it, in System Preferences. I have done this on occasion.
Plug the Brother machine to the power outlet and turn the machine power on.Connect the Brother machine to the PC by the USB http://cable.Do not connect the product to a USB port on a keyboard or a non powered USB hub. For Wired Network Users:Connect the network cable to the Brother machine and the hub.Plug the Brother machine to the power outlet and turn the machine power on.For Wireless Network Users:Plug the Brother machine to the power outlet and turn the machine power on.
Then you will need to setup your machine on the network. For more information on how to setup the machine on the network, please refer to the Quick Setup Guide or Network User's Guide for your machine. The latest Quick Setup Guide or Network User's Guide is available in the Manuals section.
3023