Familiarizing yourself with electrical installation systems can help you decide which one to use for your home or business. Read on for details.
Electrical installation in Singapore needs to be done properly and in accordance with government guidelines and regulations to ensure that your welfare is not going to be compromised. Several factors need to be seriously considered before installation, regardless if it is going to be done for residential or commercial purposes. In line with this, it is best to take note of the different types of electrical installation systems. Read on for details.
Loop-in system
Also known as a looping system, this kind of electrical installation system is one of the most-used methods of wiring installation. This is because appliances such as lamps are connected in parallel so that they can be individually controlled. When a specific connection is required at a switch or light, the feed connector is looped in. This is achieved by looping in the feed conductor and bringing it directly to the terminal. Afterwards, it is attached next to the point that needs to be fed. The switch and light is then carried around the circuit in a series of loops that are carefully connected from one point to another until the last on the circuit is properly reached.
The primary advantages of loop-in systems include improved aesthetics since joint boxes are concealed beneath roof spaces and floors.
Cleat wiring system
This kind of electrical installation system is composed of ordinary vulcanized India rubber (VIR) or polyvinyl chloride (PVC) wires that are compounded and braided, then installed on walls or ceilings. They are attached to them with the use of plastic, wood, and cleats.
It should be noted that cleat wiring systems are temporary, which means that they are not appropriate for domestic premises. This is one of the reasons why the said system is used in very few homes as well as business facilities nowadays.
Some of the most notable advantages of a cleat wiring system include affordability, simplicity, and can be easily repaired as well as inspected.
Lead sheathed wiring
Lead sheathed wiring uses conductors that are insulated with VIR and then covered with an outer sheath of lead aluminum alloy that contains approximately 95% lead. The metal sheath plays an important role in protecting the cables from moisture, mechanical damage, and atmospheric corrosion, among other issues.
Batten wiring
In batten wiring, insulated wires that run through straight teak wooden battens are used. The said battens are fixed on the walls, ceilings, and walls with the use of screws and plugs. Cables are also fitted onto the battens with the use of tinned brass link clips. The clips are connected to the battens through the use of rust-resistant nails. Batten wiring is prevalent since it is cheap and easy to install compared to other electrical installation systems.
Summing up
These are only some of the most notable electrical as well as wiring systems that are used at many residential and commercial facilities. It is best to familiarize yourself with them so that you can make a sound decision which one to use in case you decide to overhaul the electrical system of your home or business establishment.
3316