Make Login Access For Netgear Routerlogin.Net Smart Setup Wizard

Learn about fixing setup, not working, Router login issues on Netgear router devices. Get the wifirouterlogn help today and see how you can easily troubleshoot your entire Netgear router login and setup issues with the help of guides, for more information, you can contact this number: +1(866)-317-4606 get the solution.

The smart wizard is supported only on the routers of Netgear. For routerlogin net setup wizard, you need to follow the steps that are explained below. The process is quite easy and you will be able to do it yourself.

Steps to Login Access for Netgear Smart Setup Wizard

1.      You need to open the internet explorer in the system which is connected to the router.

2.      Then you need to enter the or or

3.      Also check that the default address is correct or not.

4.      Then enter username and the routerlogin net admin password.

5.      You need to type username as admin and the password as password. If the default username and password is not working, then you might have changed it.

6.      You need to enter the changed username and the password. Otherwise you won’t be able to login through the account.

7.      Then you need to perform the factory reset method.

To continue with the factory reset process, you need to

1.      To routerlogin net setup wizardyou need to check whether the power light is switched on or not.

2.      Then you need to locate the reset button or restore factory settings which are present at the back of the system.

3.      Then you need to use a paper clip to click and hold on the reset button or restore factory settings for some time.

4.      Then you need to release the button and the router reset starts.

5.      After that you need to login to the router account and enter all the credentials.

6.      Type username as admin and password as password.

7.      Then you will see that the basic settings page gets displayed.

8.      For routerlogin net setup wizard, you need to select on setup wizard that is present on the upper left corner of the screen.

9.      The setup wizard page will get displayed.

10.  Then press on yes and proceed to next.

11.  The internet connection will get detected in the Setup Wizard.

12.  Then select on next and the connection of the internet will be saved by the router.

13.  Then you need to check the router status under the maintenance section.

14.  After that you need to switch off the wireless function and connect the system to the router with the help of an Ethernet.

15.  You need to reboot the system and select on the internet connection.

16.  If the internet connection is still not there, then you need to perform Netgear router Reset as well as the modem that you are using.

17.  Then you need to do it with the system as well check if the system is connected to the modem and not with the router.

18.  If routerlogin net not working in the system and you are still unable to connect the internet, then you need to take the help of an expert.

Before starting to troubleshoot setup issues it is better to understand it a bit. In general whenever you want to do some admin work on your broadband router you must know the router’s correct internal IP configuration. It is easy to forget. Netgear solves this problems by configuring its own router’s to or instead of the IP address. Thus whenever you visit either of these two URLs by using your home network your Netgear router identifies the website name, address and converts it to the correct IP address automatically.


The above process will help you in login through the smart setup wizard. If you are still unable to do it, then you need to get in touch with an expert who will help you in to solve the problem.

Write a Comment