123.hp.com/setup

123.hp.com/setup – Download and install HP Printer driver software for HP printer setup. Before scanning documents to your computer using a 123.hp.com/setup scanner, you need to install a printer scanner driver so that your printer scanner and computers can interact with you. Start by connecting the printer setup scanner to your USB port computers.


Quick Installation through 123.hp.com/setup

You need to download the appropriate driver for your HP printer to set up your HP Printer on any device (computer, phone, etc.). This can be achieved easily by choosing the right printer model before downloading the driver (Supporting Software). However, you must keep in mind the following important points before you begin your HP Printer setup.

  • All versions of the HP printer are listed below. To download the drivers, pick the required model.
  • Always ensure that the HP printer is switched on at setup time and is connected to the same Wi-Fi network as the device. You can do this by allowing the printer’s Wi-Fi button to allow it discoverable on the network.
  • Check your firewall settings before starting the setup to make sure the firewall doesn’t block the printer driver.

    How to set up a hp printer?

    In order to set up a hp printer, first, unbox the printer

    Take out the power cable, connect it with the power source and printer

    Switch on the hp printer to proceed further

    After inserting the paper, Install 123 hp printer ink cartridges

    Troubleshooting Errors for your HP Printer

    Difficulty in configuration

    Printer Installation or HP Printer setup problem

    Frequent Paper Jams, Ink Cartridge Jam

    Corrupted or Outdated Print drivers

    Paper Jam in spooling area, Print spooler error

    Very low printing speed

    123.hp.com/setup - Complete HP Printer Setup Solution

    Install and download HP Printer driver software for HP printer setup. Before you scan documents into your devices with a 123.hp.com/setup scanner, you need to install the printer scanner driver so that your Printer scanner and devices can communicate. Start by connecting the printer setup scanner to your devices with a USB port.

     

    Download & Install HP Wireless Printer in Windows via 123.hp.com/setup

    It is essential to remember the Network Name and Network Key while installing an HP Wireless Printer in a Windows computer.

    Switch on the printer.

    Go to the control panel of the printer and select the Wireless option.

    Go to the Settings option and open the Wireless Settings menu.

    Select the Wireless Setup Wizard option.

    Follow on-screen instructions to connect the printer to a wireless network.

    Visit the HP official site 123.hp.com/setup.

    Go to the Printer section, enter the model number of your printer, and click on the Submit button.

    Select the Version of Windows according to the configuration of your computer.

    Click on the Update button and then, download the recommended driver package.

    Locate the downloaded file and double-click on the downloaded driver file to install it on the computer.

    If prompted, click on the Run button and follow on-screen instructions on the computer to properly accomplish the installation process.

HP Printer Wireless Protected Setup in Windows

The first step is to turn on your printer.

Then, open printer control and click on the wireless icon.

You will see a list of available networks and select the name of your network to complete the connection.

If needed, download the HP wireless software.

Enter the SSID of your home network and password.

Connect your Printer to the wireless network at 123.hp.com/setup.

The printer can also be connected directly to your router using the WPS button.

Press the WPS button on your Router.

Printer to connect your HP printer directly to the home

HP Printer Connection Setup Using USB Cable

You can connect your hp printer driver by making use of a USB Cable and here is the for the same:

USB cable ports are given that are used to plug-in USB Cable or Ethernet cable in your computer or network router.

Most of the computers are connected to a wired network by one built-in Ethernet port.

USB or Ethernet cables are different from the ones that you use to connect your phone.

Insert both the port of the USB cable in your printer and another on your computer.

Now follow the on-screen instructions and install the HP printer driver software.

HP Printers - Install and Use the HP Smart App (Windows 10)

This document is for HP printers and the HP Smart app for Windows 10 computers.

The HP Smart app includes tools to print, scan, check ink levels, and set up your printer on a wireless network.

An HP account might be required to use some HP Smart features. If you do not have an account, you can create one during the software installation process.