In search of the best concrete pump? If you are going to say yes, then the following blog will help you out in the best way possible. When using the pumps, you will face difficulties regarding the depths, heights, and other obstacles.
In search of the best concrete pump? If you are going to say yes, then the following blog will help you out in the best way possible. When using the pumps, you will face difficulties regarding the depths, heights, and other obstacles. All this will add up to make things difficult for the workers. It will create problems for workers in building and repairing. Moreover, if you are looking to get concrete repair NYC services, connect with skilled companies with years of experience.
Now, we will be looking at the three different types of concrete pumps, uses, and how they work:
1-Line, Trailer, or Stationary Pump
In this, the concrete will be taken from the hopper with the help of different hoses and pipes. Note that a ground line pump will help you to run over 150 meters across the ground and around the obstacles that will also include the building. With this, you can easily and instantly move the concrete to pour on the sites. The pumps you will use will be stationary or truck-mounted depending on your requirements.
How It is Useful?
The line pump will be very useful in the following ways:
• It is used when you are not able to take a mixer close to the site.
• When the ground is not even for using the wheelbarrows.
• When you are getting late and need concrete instantly.
• If you are not having enough workers.
How Does A Line Pump work?
Most of the pumps have two piston system. One will be used to push the concrete from the pipes and others will be drawing the concrete from the hopper. Note that an agitator is working to do the mixing in a hopper and ensure proper flow into the piston system.
What Length is Covered by Pump?
It can easily cover a length of 150 meters and it can be extended with the help of flexible piping.
2- Boom Or Truck Mounted Pump
It comes with a hydraulic arm to lift the pipes and it will elevate it to reach the areas. The boom pump is very much useful when you want the concrete to be delivered on a higher area and you want to pour it on obstruction in a lower area. The pumps can be truck-mounted or can be stationary as per your needs.
Why You Need This?
You need the boom pump for the following purposes:
• When you are going to pour concrete at a height.
• When you have to handle the obstacle in your way.
• When you have to drop the concrete from a height.
How Bottom Pump Works?
As discussed above, the bottom pump is also using two piston system. One piston is working to push the concrete via a pipe and the other piston will be drawing the concrete directly from the hopper. It is important to note that an agitator will work to mix the hopper. This will keep it ready to ensure a better flow within the piston system.
What Length the Bottom Pump Can Cover?
This pump can reach a length of 73 meters when it is fully extended. You can further increase the length by using additional extensions.
3-Specialized Pump For Usage
Some pumps are specially used for specific jobs on working sites like tunnels and mines. For your information, such pumps are rail mounted and skid mounted. But they are not used mostly due to their additional specialized mechanism and the high cost.
Now, you are aware of the different kinds of pumps. It is best to discuss your concrete pump as per your requirement. You should connect with the professionals to get the right assistance. In this way, you will get the right equipment for the job and you will not have to face any kind of delays.
To get the best work done, you should connect with professionals for satisfactory work.